40ft 3 axle skeleton container chassis semi-trailer can be used to transport dangerous goods. The flatbed or skeleton trailer with 12 units twist locks can carry a container of 30ft, 40ft, 45ft or two containers of 20ft containers.
The skeleton container semi-trailer adopts a penetrating beam structure. The frame structure has a straight or gooseneck type, high overall strength, lightweight, beautiful appearance, safe and reliable use, strong carrying capacity, and high reliability etc.
40ft 3 axle skeleton semi-trailer adopts advanced production technology. The longitudinal beam is automatically submerged arc welded. The whole machine is shot blasted to effectively eliminate welding stress. Advanced technology is used throughout the production process to ensure the forming and assembly accuracy of the workpiece.
The raw material resources ensure the quality of the 40ft 3 axle skeleton semi-trailer. The accessories are used by well-known manufacturers at home and abroad, and they are purchased, inspected and used in strict accordance with the requirements of the quality system documents to ensure the good performance of the vehicle.
1. Advanced fully automatic submerged arc welding process.
2. We use a complete main beam, which can increase the load capacity by 20%, improve durability and balance load stress more evenly, thereby extending service life.
3. Advanced technical design and strict quality control to avoid tire wear. After more than ten years of research and strict quality control, we can ensure that the tires stay in good condition within a driving range of 20,000 kilometers without the problems of wear and abrasion.
4. Reinforce each important part, such as reinforced suspension with a thickness of 8mm, a diameter of 60mm, and the reinforced gooseneck of the main beam. Its thickness and gooseneck portion are reinforced by additional plates and brackets.
|Dimension||12,500*2450*1450mm(According to customer demand)|
|Tyre||12R22.5/11R22.5/13R22.5/11.00R20/12.00R20(specification can be Optional)|
|Rim||8.00-20/8.5-20/8.8-20 （Patent of electrophoretic paint）|
|Kingpin||JOST brand 2.0 or 3.5-inch bolts type or Welding type|
|Main beam||Height: 450mm-520mm, the upper plate thickness is 14mm-25mm, the middle plate thickness is 8mm-12mm, down plate thickness is 16mm-25mm; Material is Q345 Carbon Steel.|
|Side beam||16mm-25mm channel steel (Material is Q235B carbon steel)|
|Crossbeam||80*40mm square tube(Material is Q235B carbon steel)|
|Twist lock||12sets Enhanced international universal twist locks|
|Landing gear||JOST（D200T）or Yahua brand(two speed or single speed)|
|Axle||13ton*3 axle FUWA/BPW/another brand|
|Suspension||mechanical suspension/air suspension|
|Brake chamber||4 units T30/30 spring brake chambers,2 units T30 brake chambers|
|Emergency valve||WABCO/Fitness brand|
|Light||Tail lamp with turn signal, brake light & reflector, side lamp, etc|
|Toolbox||1set standard toolbox( waterproof type)|
|Spare wheel carrier||1 piece ( Patent type)|
|Accessory||A set of tools, An instruction manual|
|Color||According to customer demand|
|Painting||Complete Chassis sandblasting to clean rust, 1 coat of anticorrosive prime, 2 coats of final paint|
Our company promises a one-year warranty period, during this period, under normal use if there is damage to the accessories, we will provide our customers with free new accessories.
|MAINFRAME||FRAME||1 YEAR||RUNNING GEAR||AXLE||6 MONTHS|
|SUSPENSION||6 MONTHS||AXLE BEARING||3 MONTHS|
|KINGPIN||1 YEAR||WHEEL HUB||3 MONTHS|
|BALANCE ARM||3 MONTHS||TIRE||6 MONTHS|
|ITEM NAME||WARRANTY||ITEM NAME||WARRANTY|
|BRAKING DEVICE||BRAKE DRUM||3 MONTHS||SUPPORT DEVICE||LANDING GEAR||6 MONTHS|
|BRAKE CHAMBER||3 MONTHS||SPARE WHEEL CARRIER||6 MONTHS|
|AIR RESERVOIR||6 MONTHS|
|OTHERS||LEAF SPRING||3 MONTHS|
|BRAKE CHAMBER DIAPHRAGM||3 MONTHS|
|EMERGENCY RELAY VALVE||3 MONTHS|
|BRAKE SHOE||3 MONTHS|
|RELAY VALVE||3 MONTHS|